IBM AC453A manual Operation, Find/Hide Remote, Clear, Show Always, Configure

CHAPTER 4: Operation

4. Operation

This chapter describes the menu items supported by Computertop TV-III Board.

4.1 Find/Hide Remote

Find/Hide Remote hides or redisplays the remote control window.

4.2 Clear

Clear clears the whole video buffer to black.

4.3 Show Always

Show Always can be set to on or off. If ON, the TV window is always displayed on top of other windows on the screen. If OFF, the TV window behaves like any other window and can be obscured by other windows.

4.4 Configure

Configure brings up the Configure dialog box which lets you set the following:

a.Video port address

b.Video buffer address

c.Replicate on/off

We recommend that you do not change these settings.

This option brings up the Color dialog box with seven scroll bars to control Brightness, Contrast, Tint_(Hue), Color (saturation), Red Level, Green Level, and Blue Level.

4.4.1BRIGHTNESS

Changes in the brightness level of the video are reflected with a row of vertical bars at the bottom left corner of the TV screen. The word Brightness is displayed above the row of bars. The brightness can be adjusted three ways:

a.Use the Brightness button on the remote. Pressing the top of the button increases the brightness and pressing the bottom decreases the brightness.

b.Use the B and Control-Bkey combinations on the keyboard to decrease and increase the brightness, respectively.

c.Select the Colors option from the floating menu or from the Configure menu in the menu bar. This brings up the Colors dialog box with scroll bars for color adjustments. A Brightness scroll bar lets you adjust the brightness level.

9