IBM ATA-3 manual Part, Installation, Quick, Guide, Step

Part

1

contains

the

Deskstar

Hard

Disk

Drive

installation

instructions

in abbreviated form. If you are

familiar

with

IDE

products

and

experienced

in

installing

options,

use these instructions to quickly

install

your

IDE

drive.

For

a

description

of

the

hard

disk drive

and

more

detailed

information

about

how

to

install

and

use

the

drive,

see

“Part

2:

Installation

Guide”

on

page 2-1.

Caution:

Read

the

Safety

Information

in

Appendix

A,

page

3-1,

before

installing

this

product.

In addition to this User’s Guide, your option package contains:

Deskstar

hard

disk

drive

Disk Manager

Diskette

Four

drive

mounting

screws

IDE

cable

for

connecting

two

IDE devices

(some

option

packages)

Mounting

brackets

with

screws

(some option

packages)

The

Deskstar

Enhanced

IDE

(ATA-3)

Hard

Disk

Drive

User’s

Guide

Supplement

provides

warranty

and

jumper

setting

information.

Contact

your

place

of

purchase

if

parts

are

missing

or damaged.

Be

sure

to

retain

your

proof

of

purchase.

It

might

be

required

to

receive

warranty

service.

Part

1:

Quick

Installation

Guide

Step

1.

Opening

the

Computer

1.

Turn

off

all

attached

devices.

2.

Turn

off

the

computer.

3.

Unplug

the

power

cords

for

the

computer

and

all

attached

devices.

4.

Open

the

computer.

For specific

information

on

opening

your

computer,

see the

documentation

that

comes

with

your

computer.

Step

2.

Unpacking

the

Drive

1.

Before

opening

the

antistatic

bag

containing

the

drive,

touch

the

bag

to

an

unpainted

surface

on

the

computer

for

at least

two

seconds.

This

neutralizes

any

static

electricity

buildup

on

the

bag

and

on

your

body.

2.

Remove

the

drive

from

the

bag.

Handle

the

drive

by

the

edges.

Do not

touch

any

exposed components

on

the

drive.

Copyright IBM Corp. 1997 1-1