10.Install the Control Center Stored Procedures required by SAP as described in described in Chapter 3 of the SAP Database Administration Guide for SAP NetWeaver on IBM DB2 UDB for z/OS. The procedures are used for Database administration and replace the FTP submission of JCL streams used in previous releases.
11.Define <SCHEMA> as a secondary authorization ID of the DB2 Connect userid. To do this replace the default secondary exit routine as described in
section 3.4.2.2 of the IBM DB2 V8 Administration Guide or Appendix A of the DB2 9 Administration Guide. Use the sample exit routine provided to use the RACF group name <SCHEMA> as a DB2 secondary ID. This is setup through DB2 installation job DSNTIJEX. SAPR3 is the default schema.
12.Setup the DB2 DDF environment as described in Chapter 3 of the SAP Database Administration Guide for SAP NetWeaver on IBM DB2 UDB for z/OS.
13.Install DB2 Connect V8.1, Fixpak 12 on each application server (except for z/OS application servers). Create a 64 bit instance and reference OSS Note 731937 and the document Tips for Installing DB2 Connect V8 on SAP with DB2 UDB for z/OS V8
for SAP customization information. Test the connection to DB2 using the ‘db2 connect’ command.
OR
Install the DB2 Connect V9 CLI Driver. The information on how to complete this installation is contained in OSS Note 1031213.
14.Initialize ECSA and ESQA so that the DBM1 address space is allowed 1800MB of extended private region.
Copyright 2006 IBM Solutions Technical Sales (STS) | 12/18/2007Page 20 of 51 |
12/18/2007 |
|
