IBM manual To connect to the 2104 Model DU3 or 2104 Model TU3

One Adapter in One Using System Connected to One 2104 Model DU3

1 1

2104 Subsystem

2

Using System

Figure 27. One Adapter in One Using System connected to One 2104 (Single-Bus Mode)
1	SCSI interface card
	Note: The second SCSI interface card that is in the 2104 is optional.
2	SCSI adapter of one of these types:
	v PCI SCSI-2 Single-Ended Fast/Wide Adapter (type 4-A, feature 6208)
	v PCI Single-Ended Ultra SCSI Adapter (type 4-K, feature 6206)
	v PCI Dual-Channel Ultra2 SCSI Adapter (type 4-R, feature 6205)
	v PCI Dual-Channel Ultra3 SCSI Adapter (type 4-Y, feature 6203)
	v PCI 3-Channel Ultra2 SCSI RAID Adapter (type 4-T feature 2494)
	v PCI 4-Channel Ultra3 SCSI RAID Adapter (type 4-X, feature 2498)
	Note: The 2104 can be connected to an integrated SCSI port instead of to one of
	these adapters.
Attention: An RS6000 or IBM Eserver pSeries computer running Linux for
pSeries uses the PCI Dual-Channel Ultra3 SCSI Adapter (Feature Code 6203, Type
4–Y) to connect to the 2104 Model DU3 or 2104 Model TU3.

Attention: The SCSI address of the adapter that is connected to the 2104 must be different from the addresses of the installed disk drive modules.

Appendix A. Operating with RISC Systems 41