Caution Notices

CAUTION:

This unit may have two linecords. To remove all power, disconnect both linecords.

CAUTION:

This unit weighs 38.5 kg.

CAUTION:

Do not remove cover, do not service, no serviceable parts.

CAUTION:

Double pole/neutral fusing

CAUTION:

A Standbycondition is indicated by the symbol to the right of DCdirectly above the switch, SW1. When SW1 is toggled to the right position directly under the Standbysymbol, the unit’s AC-power is not shut off.

CAUTION:

The stabilizer must be correctly attached to the bottom front of the rack to prevent the rack from tipping forward while the 2104 Model DU3 is being removed from the rack.

Do not pull out or install any unit if a stabilizer is not attached to the rack.

CAUTION:

The stabilizer must be correctly attached to the bottom front of the rack to prevent the rack from tipping forward while the 2104 Model DU3 is being installed into the rack.

Do not remove or install any unit if a stabilizer is not attached to the rack.

CAUTION:

A 2104 Model DU3 weighs up to 38.5 kg (85 lb) with the maximum number of disk drive modules installed. Do not attempt to lift the 2104 into the rack unless all the disk drive modules have been removed.

CAUTION:

A 2104 Model DU3 weighs up to 38.5 kg (85 lb) with the maximum number of disk drive modules installed. Do not attempt to remove the 2104 from the rack unless all the disk drive modules have been removed.

CAUTION:

Do not attempt to lift the 2104 by yourself. Ask another person for aid.

CAUTION:

Do not insert hands or tools into the empty space that contained the fan assembly.

CAUTION:

Do not insert hands or tools into the empty space that contained the fan-and-power-supply assembly.

642104 Model DU3 Installation Guide

Page 80
Image 80
IBM manual 64 2104 Model DU3 Installation Guide