One Adapter in One Using System Connected to Two 2104s (Model DU3) and an Internal RAID Array
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
|
| 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2104 Subsystem
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
|
| 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
2
Using System
2104 Subsystem
Figure 31. One Adapter, One Using System with Internal RAID Array, and Two 2104s (Single-Bus Mode)
1 | SCSI interface card |
| Note: The second SCSI interface card that is in the 2104 is optional. |
|
|
2 | SCSI adapter of one of these types: |
| v PCI |
| v PCI |
3 | Internal RAID array |
|
|
Attention: This 2104 configuration is not supported on the Linux operating system. |
Attention:
vThe SCSI address of the adapter that is connected to the 2104 must be different from the addresses of the installed disk drive modules.
vThe external connectors of the SCSI RAID adapter must not share a SCSI bus with the internal RAID array.
Appendix A. Operating with RISC Systems 45
