IBM ED-X10/ED-X12 29

PICTURE Menu

PICTURE Menu (continued)

Item		Description

	Selecting a mode of MY MEMORY using the buttons ▲/▼ and then
	pressing the button ► or the ENTER button performs each function.
	LOAD1 ó LOAD2 ó LOAD3 ó LOAD4
	SAVE4 óSAVE3 ó SAVE2 ó SAVE1
	This projector has 4 numbered memories for adjustment data.
	Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
	the memory whose number corresponds to the command’s number,
	and adjusts the picture automatically depending on the data.
	Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current
	adjustment data on the memory whose number corresponds to the
	command’s number.
MY MEMORY	• The current adjustment data of the items in the PICTURE menu is
	stored.
	• There may be some noise and/or the screen may flicker for a
	moment when data is loaded to memory. This is not a malfunction.
	When the current settings are not saved to memory the following
	dialog is displayed.
	dialog is displayed.		6GORQTCT[EQPFKVKQP
			/'/14;4GECNNUCXGFRCTCOGVGTU
			3WKV

To load saved adjustment settings press the MEMORY button. When there are no saved adjustment settings the following dialog is displayed.

0QUCXGFFCVC

29

Contents

About this manual Content Projector features Preparations About contents of package Fastening the lens cover Part names Projector (*) About Restart switch: Control buttons Remote control Settingup Arrangement Adjusting the projector's elevator Using the Security Bar Connecting your devices Examples of connection with a computer Connecting to a monitor (output) Connecting to a speaker with amplifier (output) Examples of connection with a VCR/DVD player Connecting power supply Remote control Putting batteries Using the remote control Power on/off Turning on the power Turning off the power Operating Adjusting the volume Temporarily muting the sound Selecting an input signal Searching an input signal Selecting an aspect ratio Adjusting the zoom and focus Using the automatic adjustment feature Adjusting the position Correcting the keystone distortions Using the magnify feature Freezing the screen Temporarily blanking the screen Operating the computer screen Multifunctionalsettings Using the menu function EASY Menu EASY Menu (continued) PICTUREMenu PICTURE Menu (continued) Page IMAGEMenu IMAGE Menu (continued) INPUTMenu INPUT Menu (continued) Page SETUP Menu SETUP Menu (continued) SCREEN Menu SCREEN Menu (continued) below Page OPTION Menu OPTION Menu (continued) Page Page 1.Using Security Features 2. Using the MyScreen PASSWORD Function PASSWORD 3. Using the PIN LOCK Function Page 4. Using the Transition Detector Function Transition Detector Page Lamp WARNING Lamp (continued) Type number = DT00757 In the case of replacement by yourself Air filter Air filter (continued) Other care Troubleshooting Related messages Regarding the indicator lamps Regarding the indicator lamps (continued) The cooling fan is not operating There is a possibility that the interior portion has become heated It is time to clean the air filter Phenomena that may be easy to be mistaken for machine defects operation sometimes resolves your problem If the situation cannot be corrected the projector will restart The electrical power cord is not plugged in Phenomena that may be easy to be mistaken for machine defects (continued) The MUTE function is working The volume is adjusted to an extremely low level The AUDIO setting is not correct The lens cap is attached The brightness and/or contrast are adjusted to an extremely low level The WHISPER function is working The lamp is approaching the end of its product lifetime Warranty and after-service Specifications Specifications (continued)