INPUT Menu
INPUT Menu (continued)Item | Description |
|
|
| Using the buttons ▲/▼ switches the function of COMPONENT |
| VIDEO port. |
| COMPONENT ó SCART RGB |
COMPONENT | When the SCART RGB is selected, the COMPONENT VIDEO port |
| function as a port for a SCART RGB signal input and VIDEO port |
| function as a port for SCART RGB sync input. A SCART adapter |
| and SCART cable realize a SCART RGB input to the projector. For |
| details, contact your dealer. |
Set the video format for the
| (1) Use the ◄/► buttons to select the input port. | 8+&'1(14/#6 | ||
| (2) Using the buttons ▲/▼ switches the mode | |||
| 58+&'1 | 8+&'1 | ||
|
|
| ||
| for video format. |
| #761 | |
|
| 065% | ||
| AUTO ó NTSC ó PAL ó SECAM |
| 2#. | |
|
| 5'%#/ | ||
VIDEO FORMAT |
| 065% | ||
| /2#. | |||
| • This item is performed only for a video signal |
| 02#. | |
|
|
| ||
| from the VIDEO port or the |
|
| |
| • The AUTO mode automatically selects the optimum mode. | |||
| • The AUTO operation may not work well for some signals. If the | |||
| picture becomes unstable (ex. an irregular picture, a color lack), | |||
| please select the mode depending on the input signal. |
| ||
| Using the buttons ▲/▼ turns the frame lock function on/off. | |||
| TURN ON ó TURN OFF |
|
| |
| • This item performs only at a RGB signal with vertical frequency of | |||
FRAME LOCK | 50 to 60 Hz. |
|
| |
• When the TURN ON is selected, a moving picture is displayed | ||||
| ||||
| more smoothly. |
|
| |
| • This function may cause a certain degradation of the picture. In | |||
| such a case, please select the TURN OFF. |
|
|
Set the RGB input signal type for the RGB port.
(1)Use the ◄/► buttons to select the RGB
| port to be set. | 4)$ 4)$ |
|
| 4)$+0 |
| RGB1 ó RGB2 | 5;0%10)10 |
| (2) Use the ▲/▼ buttons to select the RGB | 5;0%10)1(( |
|
| |
RGB IN | input signal type. |
|
SYNC ON G ON ó SYNC ON G OFF |
| |
|
|
•Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of SYNC ON G.
•In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.
33