Manuals / Brands / Computer Equipment / Projector / IBM / Computer Equipment / Projector

IBM ED-X10/ED-X12 Warranty and after-service, Specifications, NOTE • These specifications are subject to change without notice

1 62

Download 62 pages, 4.99 Mb

Warranty And After-Service

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specifications

Specifications

NOTE • These specifications are subject to change without notice.

		Item			Specification

Product name				Liquid crystal projector
Liquid		Panel size		1.6 cm (0.63 type)
Crystal	Drive system			TFT active matrix
panel
panel		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
Lens				Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm
Lamp				200W UHB
Speaker				1W x 1
Power Supply				AC100-120V/3.3A, AC220-240V/1.4A
Power Consumption				310W
Temperature range				5 ~ 35°C (Operating)
				306 (W) x 86 (H) x 249 (D) mm
Size				(Not including protruding parts)
				• Please refer to the following figure.
Weight (mass)				3.0 kg
				RGB input:		Audio output:
				RGB IN1...	D-sub 15pin mini x1	AUDIO OUT .....Stereo mini x1
				RGB IN2...	D-sub 15pin mini x1	Video input:
				RGB output:		COMPONENT VIDEO
Ports				RGB OUT..D-sub 15pin mini x1		(Y, CB/PB, CR/PR)		...... RCA x3
Ports				Audio input:		S-Video ................		Mini DIN x1
				AUDIO 1............	Stereo mini x1	Video...........................		RCA x1
				AUDIO 2............	Stereo mini x1	Communication port:
				AUDIO 3......................	RCA x2	CONTROL............ D-sub 9pin x1
						USB.........................		USB(B) x1

Optional			Lamp	DT00757
Optional			Air filter	NJ22222
parts			Air filter	NJ22222
parts			Others	• Please consult your dealer.
			Others	• Please consult your dealer.

61

Contents

About this manual Content Projector features Preparations About contents of package Fastening the lens cover Part names Projector (*) About Restart switch: Control buttons Remote control Settingup Arrangement Adjusting the projector's elevator Using the Security Bar Connecting your devices Examples of connection with a computer Connecting to a monitor (output) Connecting to a speaker with amplifier (output) Examples of connection with a VCR/DVD player Connecting power supply Remote control Putting batteries Using the remote control Power on/off Turning on the power Turning off the power Operating Adjusting the volume Temporarily muting the sound Selecting an input signal Searching an input signal Selecting an aspect ratio Adjusting the zoom and focus Using the automatic adjustment feature Adjusting the position Correcting the keystone distortions Using the magnify feature Freezing the screen Temporarily blanking the screen Operating the computer screen Multifunctionalsettings Using the menu function EASY Menu EASY Menu (continued) PICTUREMenu PICTURE Menu (continued) Page IMAGEMenu IMAGE Menu (continued) INPUTMenu INPUT Menu (continued) Page SETUP Menu SETUP Menu (continued) SCREEN Menu SCREEN Menu (continued) below Page OPTION Menu OPTION Menu (continued) Page Page 1.Using Security Features 2. Using the MyScreen PASSWORD Function PASSWORD 3. Using the PIN LOCK Function Page 4. Using the Transition Detector Function Transition Detector Page Lamp WARNING Lamp (continued) Type number = DT00757 In the case of replacement by yourself Air filter Air filter (continued) Other care Troubleshooting Related messages Regarding the indicator lamps Regarding the indicator lamps (continued) The cooling fan is not operating There is a possibility that the interior portion has become heated It is time to clean the air filter Phenomena that may be easy to be mistaken for machine defects operation sometimes resolves your problem If the situation cannot be corrected the projector will restart The electrical power cord is not plugged in Phenomena that may be easy to be mistaken for machine defects (continued) The MUTE function is working The volume is adjusted to an extremely low level The AUDIO setting is not correct The lens cap is attached The brightness and/or contrast are adjusted to an extremely low level The WHISPER function is working The lamp is approaching the end of its product lifetime Warranty and after-service Specifications Specifications (continued)