OPTION Menu
OPTION Menu (continued)Item |
| Description |
|
| |
| Using the buttons ▲/▼ adjusts the time to count down to | |
| automatically turn the projector off. | |
| Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) | |
| AUTO OFF | AUTO OFF |
| ENABLE | DISABLE |
| 0 | |
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | |
When the time is set to 1 to 99, and when the passed time with no- | ||
| signal or an unsuitable signal reaches at the set time, the projector | |
| lamp will be turned off. |
|
| If one of the projector's buttons or the remote control buttons | |
| is pressed or one of the commands (except get commands) is | |
| transmitted from the control port during the corresponding time, | |
| projector will not be turned off. | |
| Please refer to the section “Turning off the power” (17). | |
The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp. Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the lamp time, select the
LAMP TIME RESET using the button ▲.
RESET ï CANCEL
•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
•For the lamp replacement, see the section "Lamp" (50, 51).
| The filter time is the time counted after the last resetting. It is shown | |
| in the OPTION menu as the usage time of the air filter. | |
| Pressing the RESET button on the remote control or the button ► of the | |
| projector displays a dialog. To reset the filter time, select the RESET using | |
FILTER TIME | the button ▲. | |
| RESET ï CANCEL | |
| • Please reset the filter time only when you have cleaned or replaced | |
| the air filter, for a suitable indication about the air filter. | |
| • For the air filter cleaning, see the section "Air filter" (52, 53). | |
| Sets the assigned function for the MY BUTTON1 and 2 buttons on | |
| the included remote control. | |
| • RGB1: Sets port to RGB1. | |
| • RGB2: Sets port to RGB2. | |
| • COMPONENT: Sets port to COMPONENT. | |
| • | |
MY BUTTON | • VIDEO: Sets port to VIDEO. | |
• INFORMATION: Displays INPUT INFORMATION (43). | ||
| ||
| • AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE | |
| correction (35). | |
| • MY MEMORY: Loads MY MEMORY settings (29). | |
| • PICTURE MODE: Changes the PICTURE mode (25). | |
| • FILTER RESET: Displays the filter time reset confirmation dialogue | |
| (41). |
41