IBM ED-X10/ED-X12 43

OPTION Menu

OPTION Menu (continued)

Item		Description
	REMOTE FREQ.
	Use the ▲/▼ button to change the Projector's remote sensor
	setting (16).
	1:NORMAL ó 2:HIGH
	Items with a checkmark are on. The factory default setting is for
	both 1:NORMAL and 2:HIGH to be on. If the remote control does
	not function correctly set the this to either only 1 or only 2 as
	described in Remote Control Settings (16).
	Neither can be turned off at the same time.
	INFORMATION
	Selecting this item displays a dialog titled “INPUT INFORMATION”.
	It shows the information about the current input.
	INPUT-INFORMATION	INPUT-INFORMATION	INPUT-INFORMATION
SERVICE	RGB	S-VIDEO	COMPONENT
SERVICE	04x768 @60Hz	SECAM	576i @50
	FRAME LOCK	AUTO	SCART RGB

•The “FRAME LOCK” message on the dialog means the frame lock function is working.

•The “SCART RGB” message means the COMPONENT VIDEO

port is working as a SCART RGB input port. Please refer to the COMPONENT item in this menu. (33)

•This item can't be selected for no signal and sync out.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and OPTION_SECURITY are not reset.

RESET ï CANCEL

43

Contents

About this manual Content Projector features Preparations About contents of package Fastening the lens cover Part names Projector (*) About Restart switch: Control buttons Remote control Settingup Arrangement Adjusting the projector's elevator Using the Security Bar Connecting your devices Examples of connection with a computer Connecting to a monitor (output) Connecting to a speaker with amplifier (output) Examples of connection with a VCR/DVD player Connecting power supply Remote control Putting batteries Using the remote control Power on/off Turning on the power Turning off the power Operating Adjusting the volume Temporarily muting the sound Selecting an input signal Searching an input signal Selecting an aspect ratio Adjusting the zoom and focus Using the automatic adjustment feature Adjusting the position Correcting the keystone distortions Using the magnify feature Freezing the screen Temporarily blanking the screen Operating the computer screen Multifunctionalsettings Using the menu function EASY Menu EASY Menu (continued) PICTUREMenu PICTURE Menu (continued) Page IMAGEMenu IMAGE Menu (continued) INPUTMenu INPUT Menu (continued) Page SETUP Menu SETUP Menu (continued) SCREEN Menu SCREEN Menu (continued) below Page OPTION Menu OPTION Menu (continued) Page Page 1.Using Security Features 2. Using the MyScreen PASSWORD Function PASSWORD 3. Using the PIN LOCK Function Page 4. Using the Transition Detector Function Transition Detector Page Lamp WARNING Lamp (continued) Type number = DT00757 In the case of replacement by yourself Air filter Air filter (continued) Other care Troubleshooting Related messages Regarding the indicator lamps Regarding the indicator lamps (continued) The cooling fan is not operating There is a possibility that the interior portion has become heated It is time to clean the air filter Phenomena that may be easy to be mistaken for machine defects operation sometimes resolves your problem If the situation cannot be corrected the projector will restart The electrical power cord is not plugged in Phenomena that may be easy to be mistaken for machine defects (continued) The MUTE function is working The volume is adjusted to an extremely low level The AUDIO setting is not correct The lens cap is attached The brightness and/or contrast are adjusted to an extremely low level The WHISPER function is working The lamp is approaching the end of its product lifetime Warranty and after-service Specifications Specifications (continued)