6TCPUKVKQP&GVGEVQT
674010 67401((
Transition Detector
on/off menu
64#05+6+10&'6'%61410
6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF
HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP

2+0$1:

+H[QWYKUJVQJCXGCUSWCTGKOCIG
QPUETGGPCICKP
FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW
Transition Detector Alarm

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY

48

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.

•Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.

•Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.

•Keystone adjustment feature has been prohibited as long as the Transition

Detector function is ON.

4.1 Turning On the Transition Detector Function

4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the

ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current

angle, mirror and keystone setting will be recorded. NOTE: This feature may not function properly if the projector

is not in a stable position when TURN ON is selected.

4.1-2 If this function is set to TURN ON when the vertical angle of the projector, mirror or keystone setting at which the projector is turned on is different than the previously recorded the Transition Detector Alarm will be displayed and the projector will not display the input signal.

Either set the Transition Detector off in the SECURITY menu or set the projector at the recorded angle, mirror and keystone setting to display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off.

4.2 Setting the Transition Detector PASSWORD

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition

Detector on/off menu.

 

 

6TCPUKVKQP&GVGEVQT

4.2-2 Use the ▲/▼ buttons on the Transition Detector

'06'42#55914&

 

 

 

 

 

 

on/off menu to select TURN ON. The ENTER

 



 

PASSWORD BOX (small) will be displayed.

 

 

 

 

 

37+6

0':6

 

4.2-3 Use the ▲/▼/◄/► buttons to enter a PASSWORD.

ENTER PASSWORD

Move the cursor to the right side of the ENTER

 

 

BOX (small)

 

 

6TCPUKVKQP&GVGEVQT

PASSWORD BOX (small) and press the ► button

 

 

%*'%-2#55914&

 

to display the CHECK PASSWORD BOX, enter the

 

 



 

same PASSWORD again.

 

 

 

 

 

 

 

4.2-4 Move the cursor to the right side of the CHECK

37+6

0':6

 

CHECK PASSWORD

PASSWORD BOX and press the ► button to

 

 

 

BOX

display the PASSWORD for about 20 seconds,

 

 

6TCPUKVKQP&GVGEVQT

please make note of the PASSWORD during

 

 

 

%1/2.'6'

 

this time. After the PASSWORD has displayed

 



 

for about 20 seconds the screen will return to

 

 

 

'06'4 ':+6

 

the Transition Detector on/off menu.

 

 

PASSWORD BOX

Pressing the ENTER button on the remote controll or the INPUT button on the projector will close the PASSWORD BOX.

NOTE : Please do not forget your Transition Detector PASSWORD.