IBM G94 manual Activating the On-Screen-Display

On-Screen-Display

Activating the On-Screen-Display

The monitor controls are accessed by pressing button to enable OSD (On-Screen-Display). The main menu will be displayed as follows.

MA I N	CONTROL S
ma i n		s c r e e n
g e ome t r y	EXIT	c o l o r
ad v a n c e d	RESET	s p e c i a l
1 600 x 1 200 93 . 8K / 75HZ

Each Sub-Menu is selected by highlighting it via the rotary control ( sub-menu can then be selected in the same way. To exit OSD, highlight

button ( ).

) and pressing button ( ) to select. Each item from the EXIT at the center of the main menu and press select

If the OSD is not used for more than 10 seconds (delay can be set by user), the current setup will be saved and the OSD will disappear automatically.

8