7-54 Command Sets for Command Line Interface
Commands for DSL process Syntax:
Show rate
Description:
This command displays the channel data of the xDSL link. It will not
return any message if xDSL link is not established yet.
Syntax:
show defect
Description:
This command displays the defects data of the xDSL link. It will not
return any message if xDSL link is not established yet.
Syntax:
down
Description:
Disable xDSL link
Syntax:
up
Description:
Enables xDSL link
5. mode Syntax:
mode
Description:
This command displays the current mode of the xDSL link.
6. mode multi Syntax:
mode multi
Description:
Set multi mode of ADSL link (ADSL Router which supports Annex A