IBM L170 , , , , , ,

24
Screen is blank
and power
indicator is
steady green
Brightness
and Contrast
may be too
low
 Adjust brightness and
contrast.
User
controls
section on
page 15
Screen is blank
and power
indicator is
blinking green.
The monitor is
in the Power
Management
Standby state
 Press any key on the
keyboard or move the
mouse to restore
operation.
 Check the Power
Management software on
your computer
Power
Management
section on
page 22
The monitor is
not receiving
a video signal
 Check that the signal
cable is firmly connected to
the computer.
 Check that no pins are
bent in the signal cable
connector.
Connecting
your Monitor
section on
page 6
The monitor is
in the Power
Management
Suspend or
Off state
 Press any key on the
keyboard or move the
mouse to restore
operation.
 Check the Power
Management software on
your computer.
Power
Management
section on
page 22
Display mode
of the
computer is
outside the
range of the
monitor
 Reconfigure the
computer to use a
supported display mode.
Further
Information
section on
page 20
Image appears
to be smeared
There are
noises in the
video signal
 Select Image Setup
menu in the OSD. Then
select MANUAL to adjust
Phase/Clock settings.
User
Controls
setion on page
17
Image appears
to be
discolored
The Color
setting may
be incorrect
 Adjust the Color
settings.
User
Controls
setion on page
17
Problem Possible
Cause Suggested Action Reference
L170_E.fm Page 24 Friday, February 21, 2003 4:32 AM