Windows 98

Follow these instructions to install the device driver for Windows 98.
1. After you have attached the CD-ROM drive to your computer, turn on your
computer if it is not turned on already.
2. In the New Hardware Wizard for IBM USB Portable CD-ROM Drive window,
click Next.
3. Click to select the Search for the best driver for your device check box.
4. Insert the IBM USB Portable CD-ROM Drive Option Diskette into your diskette
drive.
5. Click to select the Floppy disk drive check box.
6. Click Next twice.
7. Click Finish to complete the device driver installation.
You can now use the CD-ROM drive with Windows 98.

Windows 2000

The Windows 2000 operating system includes a USB device driver. The operating
system recognizes the CD-ROM drive as soon as it is attached and uses the correct
device driver. The device driver included on the IBM USB Portable CD-ROM Drive
Option Diskette is not required for Windows 2000.
Using the CD-ROM drive audio playerfunctions
There are two ways to use the CD-ROM drive to play audio CDs. You can use the
Microsoft Windows CD Player, with which you can control the CD playback on your
computer screen. You can also use the two audio control buttons on the front of the
CD-ROM drive.
Note: You must close the Microsoft Windows CD Player in order to use the control
buttons on the front of the CD-ROM drive. The buttons will not work while the
Microsoft Windows CD Player is running.
Although there are only two control buttons on the front of the CD-ROM drive, you
can use those two buttons to perform all the major functions of a normal CD player.
Refer to the following table to determine what sequence of actions you need to take in
order to perform each function.
1-10 USB Portable CD-ROM Drive