When working with the Configuration/Setup Utility program menu, you must use
the keyboard. Refer to the following table for the keys used to accomplish various
tasks.
Note: Active keys are displayed at the bottom of each screen; not all of the above
keys are active with every menu.
In the Configuration/Setup Utility program menus, the configuration information
you can change is enclosed in brackets like these []. You cannot change
information that is not surrounded by brackets.
Exiting from the Configuration/Setup Utility Program
When you finish viewing or changing settings in the Configuration/Setup Utility
program, follow these steps to exit from the program:
1. Press Esc to return to the Configuration/Setup Utility program menu.
(Depending on where you are in the program, you might have to press Esc
several times to get back to the Configuration/Setup Utility program menu.)
Keys Function
↑ ↓Use these arrow keys to move between menu items until the item you
want is highlighted.
← →Use these arrow keys to display and toggle between choices for a menu
item.
Enter Press this key to select a highlighted menu item.
Esc Press this key to exit from a menu after viewing or making changes to
the settings in the menu.
+Use this key in some menus to increase the numerical value of a setting.
−Use this key (the minus or hyphen key) in some menus to decrease the
numerical value of a setting.
0–9 Use these number keys in some menus to change the numerical value of
a setting.
F1 Press this key for help on a selected menu item.
F9 Press this key if you changed and saved the setting of a selected menu
item and you want to restore the setting that was active before you
made the change.
F10 Press this key to return the setting of a selected menu item to a default
value.
Chapter 3. Operating Your Personal Computer 25