"
:+74
9" $
A start-up page should print, and Ser ial RS-232C should be listed as an interface.
If it doesn’t, refer to chapter 5, “Troubleshooting Printer Problems,” of the
Opera-
tion
manual.
4 Test the communication between the printer and the computer.
You can do this by sending a file from one of your applications, or refer to chapter
5, “Troubleshooting Printer Problems,” of the
Operation
manual.
4*.The QMS CrownNet Ethernet interface combines hardware and hos t software to allow
printer connection to an Ethernet network. CrownNet s upports the following:
The instructions given in this section are the minimum steps needed to get your printer
up and printing. For complete installation information refer to the QMS
CrownNet
Setup Guide
on the QMS
Software Utilities CD-ROM
. For information on configuring
the CrownNet interf ace and using the Cro wnNe t softw ar e (Cro wnAdmi n, Cro wnA dmin,
CrownNet Manager, and the CrownNet Print Utility for Windows), refer to the QMS
CrownNet System Administrator’s Guide
on the QMS
Software Utilities CD-ROM
.
$ &
The printer provides a twisted-pair (10BaseT/100BaseTX) Ether net interface.
Twisted-pair Ethernet connections use RJ45 connectors.
Operating System Protocol
Macintosh EtherTalk
LAN Manager/LAN Server NetBIOS/NetBEUI
NetWare IPX/SPX
UNIX or OS/2 TCP/IP
Windows 3.1/Windows 95/98 TCP/IP/NetBIOS/NetBEUI
Windows NT TCP/IP/NetBIOS/NetBEUI