!1'
9" $
10 Change to the
y:
/PLATFORM/WIN_NT/DRIVER/4X/
type
directory, where
y
is
the workstation’s CD-ROM drive, and
type
is the type of processor on your
workstation.
QMS.INF displays in the File Name list.
11 Choose OK to return to the Install from Disk window.
12 Choose OK again.
A list of QMS printers displays.
13 Select QMS 3260/4032 Print System, and then continue following the
instructions in the Add Printer Wizard to complete the installation.
14 When you're returned to the QMS Printer Utilities Setup, continue to install
other printer utilities or drivers, or choose Cancel to exit from the setup
program.
15 Remove the CD-ROM, and store it in a safe place.
Reinstallation
»Note:
If a Microsoft Windows NT 4.0 or a QMS Level 2 Windows NT 4.0 printer driver
has been previously installed, you must use the following procedure to delete the files
before installing a new printer driver.
1 Open Windows NT Explorer (from the Start>Programs menu choose Win-
dows NT Explorer).
2 Delete the printer(s) you want to replace or upgrade.
3 Install the new printers using the installation procedure on page 14.
4 Reboot your workstation.
)(,-*The QMS printer drivers for Microsoft Windows NT 3.5x support all of your printer's
features. You can print from Windows NT over the network using one of the following
three protocols:
TCP/IP
NetBIOS/NetBEUI