T50_setup.fm Page 2 Thursday, August 9, 2001 11:09 AM
Setup
Hardware Requirements
This monitor requires a computer with a suitable
Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or
VGA 640 x 480 at 60 Hz.
Handling Instructions
Do not support the monitor within the screen area. The Liquid Crystal Display is glass and can be damaged by rough handling or excessive pressure.
1.Lift the monitor by placing your hands where indicated below.
2.Before using your monitor for the first time, remove the clear protective film from the front of the screen.
Workplace Preparation
This section gives advice on what you should
consider before you set up your monitor.
Height
The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows, usually at a right angle to any windows. The monitor should be positioned directly in front of you so that you do not have to twist your body to use it. Tilt the monitor to a comfortable viewing angle.
2
