IBM WS525 manual Communications Port Set-Up Screen

Installation and Set-Up

1.2 Set-Up

Notes

For a session to be enabled, it must be assigned to a comm port. If you assign more than one session to the same comm port, you must use a terminal server that supports Terminal Device Session Management Protocol (TD/SMP), or a host that supports Session Support Utility (SSU).

A port cannot be assigned as both a comm port and a printer port at the same time.

Selecting Comm = `` none'' disables a session. A session that is dimmed is disabled,￿but it can still be configured in Set-Up.

Figure 1–3 Communications Port Set-Up Screen

MA048493.GRA

1–8Installation and Set-Up