Manuals / IBM / Computer Equipment / Network Router

IBM ZMAXdp Using “AMIFLASH.EXE” to update the BIOS, SFF Workstation, AMIFLASH / filename

Models: ZMAXdp

1 81
Download 81 pages 19.16 Kb
Page 55
Image 55
Using “AMIFLASH.EXE” to update the BIOS

SFF Workstation

Installation Guide

Using “AMIFLASH.EXE” to update the BIOS

Update the BIOS using the AMIFLASH.EXE utility in DOS environment.

1.Visit the IWILL website ( http://www.iwill.net ) to download the latest BIOS file for your motherboard. Save the BIOS file to a bootable floppy disk.

2.At the DOS prompt, type the command line:

AMIFLASH / <filename>

where “filename” means the latest (or original) BIOS file that you copied to the bootable floppy disk. The screen displays the status of the update process.

The BIOS information on the screen is for reference only. What you see on your screen may not be exactly the same as shown.

DO NOT shutdown or reset the system while updating the BIOS! Doing so may cause system boot failure!

3. When the BIOS update process is complete, the utility returns to the DOS prompt.

User’s Manual

55

Page 54 Page 56
Page 55
Image 55
IBM ZMAXdp user manual Using “AMIFLASH.EXE” to update the BIOS, SFF Workstation, AMIFLASH / filename, User’s Manual
Page 54 Page 56