IBM ZMAXdp user manual Iwill, To set a Supervisor Password, User’s Manual

IWILL ZMAXdp

To set a Supervisor Password:

1.Select the Change Supervisor Password item and press Enter.

2.On the password box that appears, you can type a password composed of letters and/or numbers, and press Enter. Your password should have at least six characters.

3.Confirm the password when prompted. The message “Password Installed” appears after you have successfully set your password.

4.The Supervisor Password item now shows Installed.

To change the supervisor password, follow the same steps as in setting user password. To clear the supervisor password, select the Change Supervisor Password then press Enter. The message “Password Uninstalled” appears.

If you forget your password, you can clear it by clearing (erasing) the CMOS RTC (Real Time Clock RAM). See Chapter 4 “Clear CMOS Jumper“ for more information on how to erase the RTC RAM.

68 User’s Manual