Ice-O-Matic Sensor Maintenance, Bin Control Sensor, Water Sensor, MFI Series, Page

MFI Series Sensor Maintenance

Bin Control Sensor:

The bin control uses devices that sense light, therefore they must be kept clean enough so that they can “see”.

At least twice a year, remove the bin control sensors from the base of the chute, and wipe the inside clean, as illustrated.

Slide Bin Controls to

Remove

Water Sensor:

The ice machine uses a probe in the water reservoir to determine if there is water.

At least twice a year remove the probe from the reservoir and wipe the tip clean of mineral build-up.

	Clean the probe’s tip with ice
	machine cleaner and a soft
Page 18	cloth.