18
3
CONVENTIONALOPERATION
3
17
3CONVENTIONALOPERATION
DDTMF transmission
If the transceiver has [DTMF Autodial] assigned to it, the automatic
DTMF transmission function is available. Up to 8 DTMF channels
are available.
TO SELECT ATX CODE:
qPush [DTMF Autodial]— a DTMF channel appears.
wPush [ ]/[ ]to select the desired DTMF channel.
ePush [DTMF Autodial] to transmit the DTMF code in the selected
DTMF channel.
■Scrambler functionThe voice scrambler function provides private communication be-
tween stations. The frequency inversion type is equipped to all ver-
sions, and some versions have the Rolling or Non-rolling type
installed.
qPush [Scrambler] to turn the scrambler function ON.
w“” appears.
ePush [Scrambler] again to turn the scrambler function OFF.
■User set modeUser set mode is accessed at power ON and allows you to set
seldom-changed settings. In this case you can “customize” trans-
ceiver operation to suit your preferences and operating style.
Entering the user set mode:
qWhile pushing and holding [ ] and [ ], rotate [VOL] to enter
the user set mode at power ON.
wPush and hold [P0] to enter user set mode. Push [P0] momen-
tarily to select the item.
Then push [ ] and [ ]to set the desired level/condition.
Available set mode functions:
•Backlight : ON, Auto or OFF
•Beep : ON or OFF
•SQLLevel : 0 to 255
•AF Min level : ON or OFF
•Mic Gain : 1 to 5
•Battery Voltage : ON or OFF
ePush and hold [P0] again to exit set mode.
User set mode is also available using a programmable key. Please
refer to p. 11 [User Set Mode] section.
!IC-F50_F60 BIIS.qxd 03.9.12 8:49 AM Page 17 (1,1)