3 CONVENTIONAL OPERATION
DTransmitting notes
•Transmit inhibit function
The transceiver has several inhibit functions which restrict trans- mission under the following conditions:
-The channel is in mute condition (‘Inaudible’ condition; “ 
” does not appear).
-Channel is busy.
-
-The selected channel is a ‘receive only’ channel.
•Time-out timer
After continuous transmission for the
•Penalty timer
Once the
DTX code channel selection
If the transceiver has [TX Code CH Select] assigned to it, indica- tion can be toggled between the operating channel number (or name) and TX code channel number (or name). When the TX code channel number (or name) is displayed, the [
]/[
] key selects the TX code channel.
TO SELECT A TX CHANNEL:
qPush [TX Code CH Select]— a TX code channel appears.
w Push [
]/[
] to select the desired TX code channel.
e Push [Call] (or [PTT] during MSK operation) to transmit the se- lected TX code.
r Push [TX Code CH Select] again to return to the operating chan- nel number indication.
FOR TX CODE CHANNEL TYPE:
If the transceiver has a [TX Code CH Up] or [TX Code CH Down] key assignment, the programmed TX code channel can be selected directly.
CONVENTIONAL OPERATION 3
DTX code number edit (PMR or BIIS PMR operation only) If the transceiver has [TX Code CH Select] or [TX Code Enter] as- signed to it, TX code contents can be edited within the allowable
digits. | 3 |
|
TO EDIT A TX CODE VIA [TX CODE CH SELECT] KEY:
qPush [TX Code CH Select] to enter the TX code channel selec-
tion mode.
•Select the desired channel using [
]/[
] if necessary.
wPush [TX Code CH Select] for 1 sec. to enter the TX code edit
mode.
ePush [TX Code CH Select] to select the desired digit to be
edited.
rSet the desired digit using [
]/[
]/[TX Code CH Up]/[TX Code CH Down].
tPush [TX Code CH Select] to set the digit. The editable digit will
move to the right automatically.
yRepeat r and t to input all allowable digits.
uPush [Call] or [PTT] to transmit the selected TX code.
TO EDIT A TX CODE VIA [TX CODE ENTER] KEY:
qSelect the desired TX code channel via [TX Code CH Up]/[TX Code CH Down].
wPush [TX Code Enter] to enter the TX code edit mode.
ePush [TX Code Enter] to select the desired digit to be edited.
r Set the desired digit using [
]/[
]/[TX Code CH Up]/[TX Code CH Down].
t Push [TX Code Enter] to set the digit. The editable digit will move to the right automatically.
y Repeat r and t to input all allowable digits.
u Push [Call] or [PTT] to transmit the selected TX code.
15 | 16 |
