Icom IC-450, IC-460 instruction manual Panel Description, Front, top and side panels

2 PANEL DESCRIPTION

■Front, top and side panels

	w
q	e
	r
i	Speaker
	(See the following
	NOTE.)
u	Microphone
	Function display
	(p. 6)
	t

y

NOTE: If the speaker netting (for dust proofing) becomes wet, dry it with a hair drier (cool mode) etc. before operating the transceiver. Otherwise the audio may be difficult to hear for loss of the sound pressure.

PANEL DESCRIPTION	2
q VOLUME CONTROL [VOL]	2

Turns power ON and adjusts the audio level.

w RED BUTTON

The desired function can be assigned by your dealer.

e ANTENNA CONNECTOR

Connects the supplied antenna.

r SPEAKER-MICROPHONE CONNECTOR [SP MIC]

Connects the optional speaker-microphone. (p. 46)

[SP MIC] jack cover

NOTE: KEEP the [SP MIC] jack cover attached to the transceiver when the speaker- microphone is not used.

(See p. 2 for details)

t DEALER-PROGRAMMABLE KEYS [P0] to [P3]

The desired functions can be assigned independently by your dealer.

yCH UP AND DOWN KEYS []/[]

➥During standby condition, push to select an operating channel.

➥After pushing [TX Code CH Select], push to select a TX code channel.

➥After pushing [DTMF Autodial], push to select a DTMF channel.

➥After pushing and holding [Scan A Start/Stop]/[Scan B Start/Stop], push to select a scan group.

➥After pushing [Digital], push to select a BIIS code, status num-

ber or SDM.

*Desired functions can be assigned independently by your dealer.

☞ Continue to the next page.

3 4