5 BATTERY CHARGING
■Optional battery case
When using the optional battery case attached to the transceiver, install 5 ⋅ AA (R6) size alkaline batteries as illustrated at right. The
qHook your finger under the latch, and open the cover in the direc- tion of the arrow (q). (Fig.1)
wThen, install 5 ⋅ AA (R6) size alkaline batteries. (Fig.2)
•Install the alkaline batteries only.
•Be sure to observe the correct polarity.
•Do not pin the ribbon under the batteries.
eClose the cover by fitting in the direction of the arrow (w) first, then check the latch is in place (e). (Fig.1)
•Be sure the gasket and the ribbon are set correctly, and do not pro- trude from the battery case. (Fig.3)
CAUTION:
•When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batter- ies together.
•Keep battery contacts clean. It’s a good idea to clean battery terminals once a week.
BATTERY CHARGING 5
Fig.1 | Latch |
q
5
w 
e
Fig.2
Ribbon
Fig.3
Gasket
Ribbon
43 | 44 |
