Icom IC-F610 Making a call with a Memory Individual Code, Calling the Dispatcher

2 OPERATION

tA warning beep will be emitted 10 seconds before the communication timer reaches the limit. When the limit has been reached, the communication will be discon- nected automatically.

TIME 1 59

yTo manually end the communication, push [Clear]. (or push [✱], then push [#]).

CLEAR DOWN

DMaking a call with a Memory Individual Code

Push []/[] to select a memory individual code to make the call.

qDisplay an individual code by push []/[].

wSelect the desired individual code using []/[].

PERSONAL 1

ePush [PTT] to start calling with the selected individual code.

rWhile ‘Calling’ is displayed, the intermittent beep sound

for calling will be heard.

tWith ‘Connected’ displayed, will appear allowing you

to start the communication. At the same time, the count- down timer will appear to limit the communication time.

yA warning sound will be emitted 10 seconds before the

communication timer reaches the limit. When the limit has been reached, the communication will be discon- nected automatically.

uTo manually end the communication, press the [Clear] key. (or push [✱], then push [#]).

DCalling the Dispatcher

The despatcher may be called directly.

qPress the [Dispatcher] key.

DESPATCHER

wPress the [PTT] key. The call to the dispatcher will be started.

NOTE: If calling direct to the Despatcher is prohibited, the status message 00 (or 0) (Call Back Request) is transmitted and then the the transceiver will return to the waiting mode.

eWhile ‘Calling’ is displayed, the intermittent beep sound will be heard.

rWith ‘Connected’ is displayed, will appear allowing you to start the communication. At the same time, the countdown timer will appear to limit the communication time.

7