Icom IC-F610 instruction manual Optional UT-109 /UT-110 Installation, Mounting the transceiver

DMounting the transceiver

The universal mounting bracket supplied with your transceiv- er allows overhead mounting.

•Mount the transceiver securely with the 4 supplied screws to a thick surface which can support more than 1.5 kg.

Flat washer

Spring washer

When using self-tapping screws

CONNECTION AND MAINTENANCE 8

■Optional UT-109 /UT-110

installation

qTurn power OFF, then disconnect the DC power cable. w Unscrew the 4 screws, then remove the bottom cover. e Cut the print pattern on the PCB at the TX mic circuit (A)

and RX AF circuit (B) as shown in the following figure. r Install the scrambler unit as shown in the following left. t Return the bottom cover and screws to the original posi-

tion.

• Install the unit • Cut the print pattern

Front panel

A

B

NOTE: Be sure to re-solder the above dis- connected points, otherwise no TX modu- lation or AF output is available when you remove the scrambler units.

26