Icom IC-F610 instruction manual ‘ Special calling via the keypad

•Enter #44n✱ plus station B’s individual code and then push [#]. This will allow you to cancel the Divert 3rd Party call.

•Enter #45n and then push [#]. This will allow you to can- cel the call that diverted to you.

➥In the place of ‘n’, enter 1 for voice, 0 for data, or noth- ing for both voice and data.

DSDM (Short Data Message) Call

•Enter ✱2✱ plus data (up to 24 digits in total) via the key- pad and then push [#]. This will allow you to make a data call to a predetermined station.

•Enter ✱2✱ plus data via the keypad plus individual code (up to 24 digits in total) and then push [#]. This will allow you to make a data call to an individual code station.

D5-Digit Routing code calling

Converting a prefix code (3 digits) plus a fleet code (4 dig- its) to 3 digits allows you to dial a different prefix code and fleet code by 5 digit dialling.

➥Convertible numbers; 200 to 299, 900 to 999, 20 to 29, 90 to 99.

*Pre-program the prefix and fleet numbers before con- verting.

•Individual calling with different prefix code. To call 211 2006 300 from 200 2001 200;

OPERATION 2

➥Pre-program 22 to prefix code 211 and fleet code 2006 as 5-Digit Routing code. Enter 22300# to start the call.

DCancellation of calling

Enter ✱ and then push [#]. This will allow you to cancel the current call.

➥This will allow you to end the communication or cancel the current call.

DCancellation of Input

When you are entering data via the keypad, push []/[]. This will delete the data starting with the last character/digit entered, allowing you to restart entering the data again.

Push [Clear] to cancel the inputting and return to the wait- ing mode.

‘Special calling via the keypad

DReDial

Enter ## via the keypad. This will allow you to redial the last number called.

DShort Dialling

Enter # followed by the memory location (1 to 9). This allows you to automatically dial a commonly used number from memory 1 to 9 by pushing []/[].

12