Icom IC-F610 instruction manual 0168

		DECLARATION
	OF CONFORMITY
We Icom Inc. Japan		0168
Osaka 547-0003, Japan
1-1-32, Kamiminami, Hirano-ku
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test		Düsseldorf 10 Apr. 2002
Suite measurements have been performed.		Place and date of issue

Kind of equipment: UHF TRANSCEIVER

Icom (Europe) GmbH

CE

Type-designation: iC-f610

440—490 MHz 12.5 KHz/ 25 KHz

440—490 MHz 12.5 KHz/ 20 KHz

400—430 MHz 12.5 KHz/ 25 KHz

Version (where applicable):

This compliance is based on conformity with the following harmonised standards, specifications or documents:

i)EN 300 279 (February 1999)

ii)EN 60950 August 1992, A11 1997 iii)˚EN 300 086 (March 2001)

iv)EN 300 219 (March 2001)

v)EN 300 113 (March 2001)

Himmelgeister straße 100 D-40225 Düsseldorf

Authorized representative name

T.Maebayashi General Manager

Signature

CE Versions of the IC-F610 which display the “CE” symbol on the serial number seal, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/EC.

This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or may be subject to licensing conditions in the country of use. Be sure to check that you have the correct ver- sion of this radio or the correct programming of this radio, to comply with national licensing requirement.

30