8 CONNECTION AND MAINTENANCE
■Mounting the transceiver
The front panel can be inverted for correct viewing while leav- ing the
DInverting the Front panel
qUnscrew the
wDetach the Front panel forward from the transceiver.
eBend the flat cable between Front panel and main unit as shown in the following diagram.
Flat cable orientation
to MAIN unit
normal bend line
inverted
bend line
to Front panel
rInvert the transceiver 180 degrees clockwise as below.
yTighten the 2 screws.
CAUTION:
•NEVER rotate the transceiver more than 180 degrees.
•DO NOT bend the flat cable too hard. The cable may dam- aged.
NOTE: Be sure to bend the flat cable in the correct direction, before turning over (inverting) the transceiver.
25