Icom IC-T90A manual PH ch 53.900 MHz Transmitting 8V 145 MHz Displayed frequency

ADJUSTMENT MODE ADJUSTMENTS (Continued)

•The following adjustment must be performed at “ADJUSTMENT MODE”.

•The adjustment channel indicators (PL, DL, PH, DH, PE, DE) need to change from “DH” channel indicator to use “0” or “.” keys.

					MEASUREMENT					ADJUSTMENT
ADJUSTMENT		ADJUSTMENT CONDITION							VALUE	POINT
					UNIT	LOCATION				UNIT	ADJUST
OUTPUT	7	• Displayed frequency :			Top	Connect	an	RF	0.5 W	Top	[DIAL]
POWER		(PH ch.)	50.000 MHz		panel	power meter to the				panel
(8V 50 MHz		• Output power		: Low		[ANT] connector.
Low power)		• Transmitting
	8	• Displayed frequency :							0.5 W		[DIAL]
		(PH ch.)	53.900 MHz
		• Transmitting
(8V 145 MHz
	9	• Displayed frequency :			Top	Connect	an	RF	0.5 W	Top	[DIAL]
Low power)		(PH ch.)	144.000 MHz		panel	power meter to the				panel
		• Output power		: Low		[ANT] connector.
		• Transmitting
	10	• Displayed frequency :							0.5 W		[DIAL]
		(PH ch.)	148.000 MHz
		• Transmitting
(8V 440 MHz
	11	• Displayed frequency :			Front	LCD display			DL = “00”	Top	[DIAL]
Low power)		(DL ch.)	440.000 MHz		panel					panel
		• Output power		: Low
		• Transmitting
	12	• Set the channel indicator : “PL”			Side	Connect an amme-			1.1 A		[DIAL]
		• Transmitting			panel	ter between a power
						supply	and	the
						transceiver.
	13	• Set the channel indicator : “DL”			Top	Connect	an	RF	0.5 W		[DIAL]
		• Transmitting			panel	power meter to the
						[ANT] connector.
	14	• Displayed frequency :			Front	LCD display			DL = “00”		[DIAL]
		(DL ch.)	450.000 MHz		panel
		• Output power		: Low
		• Transmitting
	15	• Set the channel indicator : “PL”			Side	Connect an amme-			1.1 A		[DIAL]
		• Transmitting			panel	ter between a power
						supply	and	the
						transceiver.
	16	• Set the channel indicator : “DL”			Top	Connect	an	RF	0.5 W		[DIAL]
		• Transmitting			panel	power meter to the
						[ANT] connector.

5 - 7