IDEAL INDUSTRIES 45-930 Shielded Twisted Pair STP Cable Stripping System, Table of Contents

Shielded Twisted Pair (STP) Cable Stripping System

Table of Contents
Introduction	2
Caution and Safety Instructions	3
Environmental Conditions	3
Warranty & Service Policy	3
Unpacking	3
STP Service Setup	3
Electrical Connection Requirements	4
Air Connection Requirements	4
System Controls	4
Heat Adjustment	4
Thermal Head Rotation Speed Adjustment	5
Pull Grip Pressure Adjustment	5
Strip Length Adjustment	5
STP Operation
Head Adjustment	6
Thermal head Rotation Speed Adjustment	6
Pull Grip Pressure Adjustment	6
Strip length Adjustment	7
Cycle Mode	7
Slug Removal	8

Program Mode	9
Set Mode	10
STP Service	11
Batching	11
Recommended Spare Parts	12
Parts Replacement
Gripper Pad Replacement	13
Front Gripper Pad Replacement	13
Rear Gripper Pad Replacement	14
Tension Springs	14
Blade Replacement	15-16
CPU Module Replacement	17
Power Module Replacement	17
Maintenance	18
Changing Slug Tray Location	18
Trouble Shooting	18
Machine Schematic & Parts List	19-21
Electrical Schematic	22

Introduction

The IDEAL Shielded Twisted Pair Cable Stripping System (STP) is a programmable bench top machine that accurately removes the outside jacket from shielded twisted pair cable. The STP addresses occupational ergonomic needs by offering an alternative to manual stripping methods which are known to have contributed to cumulative tissue trauma.

The STP system automatically adjusts to the size of the cable being stripped up to a maximum diameter of 0.3125 inches. Cable strip length is programmable by inches or millimeters. The strip length is adjusted in preset increments from a minimum of 1-1/4 inches to a maximum of 6.00 inches. A strip operation cycle can be completed in as little as five seconds.

The large, easy-to-read display shows the operating function status and facilitates program entry. A memory module stores up to 500 user defined “batch” programs and incorporates a battery back-up system. A service machine message can be programmed for display when the machine completes a preset amount of operations. All operating parameters can be secured from unauthorized modifications by a programmable security code. The intuitive front panel keypad provides tactile feedback and is highly resistant to harsh industrial environments.

The STP stripping system consistently produces quality levels achieved in the aerospace industry. With its wide array of powerful features, the IDEAL STP is extremely flexible, simple to program and easy to use.

2