Control, Firmware update, SRS TruBass, English, No LEDs, 100%

Control

SRS TruBass

The iW3 features SRS TruBass® digital sound processing to enhance the audio performance and ensure proper bass response when listening to your music. The SRS TruBass function is on by default and can only be turned off using the iHome Set app.

The iW3 has an EQ feature that is controlled using the iHome Set app to adjust Bass and Treble.

TREBLE +/- buttons: Adjust treble levels between -5 and +5. Default is 0

BASS +/- buttons: Adjust treble levels between -5 and +5. Default is 0

Firmware update

It may be necessary to update the firmware of your iW3 speaker to ensure the latest compatibility and optimal functionality. TheiW3 offers three different methods for performing the firmware upgrade, detailed below as Option A, B and C. You only need to choose one.

Note: If you have access to an iOS device running 4.2 or later we recommend option A.

Option A - Firmware update using iHome Set

1.Power ON the iW3 speaker and place on the charging base.

2.Connect your iOS device to the iW3 using the included iPod USB sync cable.

3.Download our free iHome Set app from the App Store and launch the app.

4.Scroll down the app interface and select ‘Search for Update’.

5.If there is an update available, a message will pop-up asking if you would like to apply the firmware upgrade.

6.Select‘Upgrade’.

10:09 PM

About

NetworkRefresh

Wi-Fi

Show Details

Speaker Name

Name iHome iW3 XXXXXX

Firmware Update

Option B - Firmware update using USB mass storage device

Search for Update

Model: iHome iW3 • Firmware: 8.0.0

1.Using your computer visit www.ihomeaudio.com/support/product/iW3 and download the latest firmware from the top right corner of the support page. Please be sure to remember the location where you save the file to on your computer.

2.Locate the file from step 1 and load the file onto a USB mass storage device

Note: You must load it to the root (main) directory. Do not create a separate folder within the USB device.

3.Power on your iW3. When the iW3 is fully powered on connect the USB drive to the port located on the rear panel.

4.Press and Hold the Firmware button for 5 seconds.

Note: The update process will take around 3 minutes to complete.

During Firmware Update:

There are two indicators on the iW3 to track the progress of the update:

1.The firmware update LED will remain RED

2.The top panel LED's will light up in succession to note the progress of the update (see diagram below)

Note: If the Firmware LED remains unlit this indicates that the process was unable to begin. Please be sure the proper file was loaded on the USB drive and start over from step 3 above.