Spa Shell Diagram
| D |
| D |
O |
|
| O |
|
|
| |
A | A |
|
|
|
|
| |
C |
|
| D |
|
| E | |
|
|
| |
E |
| K |
|
H |
|
| |
|
|
| |
| B | F | K |
|
|
| |
I |
|
|
|
J |
|
| A |
|
|
| A |
P | N |
|
|
|
|
| |
|
|
| O |
G | M |
| L |
A.The eight adjustable push/pull jets allow you to direct their water flow and can be closed and opened with a push or a pull on their nozzles. Water pressure to the other hydrotherapy jets can be increased by closing the adjustable push/pull jets. If no air flows through the jets when the air control is turned counterclockwise, pull the nozzles slightly.
B.The adjustable whirlpool jet allows you to direct its water flow and provides a consistent, relaxing whirlpool action.
C.The large rotary jet has two jets of water that pro- duce a pulsing, spinning, massage action.
D.The thirteen whirly jets provide a continuous whirling massage action.
E.The seven fixed jets provide a constant massage.
F.The ozone jet is
G.The skimmer cleans the surface of the water.
H.The
I.The temperature probe monitors water tempera- ture.
J.The underwater light can be used for night opera- tion (see USING THE CONTROLS on page 12).
K.The three suction vents near the floor of the spa bring water into the pumps in order to operate the system. Never operate the spa without the suc- tion covers in place.
L.The air control determines the amount of air flowing through the spa jets during operation (see USING THE CONTROLS on page 12).
M.The diverter controls the flow of water through the hydrotherapy jets and the whirlpool jet (see USING THE CONTROLS on page 12).
N.The console controls the spa jets, the underwater light, and the water temperature setting (see USING THE CONTROLS on page 12).
O.The three pillows can be removed or turned 180° to provide two comfortable positions.
P.The filter cleans the water and can be removed for cleaning or replacement (see CHECKING AND CLEANING THE FILTER on page 13).
11
