A.) | Attach the |
| Main Seat Support (#52). The other side rest against the Backrest Adjustment Bar |
| (#10). |
B.) | Place the Backrest Board (#18) onto the Backrest Supports (#60). Secure it with four |
| M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51). |
C.) | Place Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes and |
| secure the Seat with four M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51). |
D.) | Insert the Arm Curl Stand (#22) into the opening on the top of the Front Stabilizer (#42). |
| Secure it with a Knob Bolt (#47). |
E.) | Attach the Arm Curl Pad (#23) to the Arm Curl Stand (#22). Secure it with two M8 x 5/8” |
| Hex Bolts (#20) and ∅ 5/8” Washers (#21). |
| DIAGRAM 4 |
7
