Installation

Where to install the tumble dryer

Electrical connections

EN

• Install the dryer far from gas

 

 

ranges, stoves, radiators or

 

hobs, as flames may damage it.

 

If the dryer is installed below a

 

worktop, ensure there are 10

 

mm between the upper panel of

 

the dryer and any objects

 

above it, and 15 mm between

 

the sides of the machine and

 

the walls or furniture units

 

adjacent to it. This ensures

 

adequate air circulation.

10 mm

15 mm 15 mm

Before plugging the appliance into the socket, check the following:

• Make sure your hands are dry.

• The socket must have an earth connection.

• The socket must be able to withstand the machine’s

maximum power output as indicated on the data plate (see

Description of the tumble dryer).

• The power supply voltage must fall within the values indicated

on the data plate (see Description of the tumble dryer).

• The socket must be compatible with the dryer’s plug.

Should this not be the case, replace the plug or the socket.

￿ Do not use extension cords.

￿ The dryer must not be installed outdoors, even if the space is

sheltered. It can be very dangerous if exposed to rain or storms.

￿ Once installed, the dryer’s electrical wire and plug must

Ventilation

•The room must be adequately ventilated while the dryer is running. Make sure that the dryer is installed in a room free of humidity and with adequate air circulation. The flow of air around the dryer is essential to allow water to condense during drying; the dryer will not function properly if it is placed in an enclosed space or inside a cabinet.

￿Some condensation may form if the dryer is used in a small or cold room.

￿We do not recommend installing the dryer in a cupboard; moreover, never install the machine behind a lockable, sliding or hinged door located on the opposite side of the dryer door.

Water drain

If your dryer is installed next to a drain the water can be plumbed into this drain. This does away with the need to empty the water container. If the dryer is stacked onto or installed next to a washing machine it can share the same drain. The height of the drain must be less than 3' (1 m) from the bottom of the dryer.

Remove existing hose from position shown in picture A and fit a suitable length of hose and connect as shown in picture B.

￿Make sure that the hose is not squashed or kinked when the dryer is in its final location.

be within reach.

￿ The power cord must not be bent or squashed.

￿ The power cord is supplied fitted with a BS1363 plug

and with a 13 amp BS1362 fuse. If it is necessary to fit a

replacement fuse, it must be a 13 Amp ASTA approved

to BS1362 type. WARNING: The plug must not be used

without a fuse cover. If a replacement fuse holder/cover is

required, it must be of the same colour coding or wording as

shown on the base of the plug.

Replacements are available from authorised dealers.

Moulded plug

Changing the plug

The wires in the power cord are coloured in accordance with the following.

Green and Yellow (Earth)

 

 

13A ASTA approved fuse

wire to terminal marked

 

 

to BS 1362.

“E”, symbol x, or coloured

GREEN &

 

 

green and yellow.

YELLOW

 

 

 

BROWN

13 ampere fuse

 

 

 

 

 

 

 

Brown (live) wire to teminal

Blue (Neutral) wire to

BLUE

CROSS-BAR

marked “L” or coloured

terminal marked ”N” or

 

CORD GRIP

red.

coloured black.

 

 

 

1

2

2

1

m

1

<

H

￿ If the plug being replaced is a non-rewirable type, then the

cut-off plug must be disposed of safely. DO NOT leave it where

it can be inserted into a socket and create a shock hazard.

￿ The power cord should be checked periodically and replaced

by a cord specially prepared for this dryer and fitted only by

authorized technicians (see Service). New or longer power

cords are supplied at an extra charge by authorized dealers.

￿ The manufacturer denies any responsibility should any

of these rules not be followed.

Picture A

Picture B

￿ If in doubt about any of the above consult a qualified electrician.

Preliminary information

Once the tumble dryer is installed, clean the inside of the drum before operating it and remove any dirt accumulated during transportation.

4

Page 3 Page 5
Page 4
Image 4
Indesit IDC 75 S Installation, Where to install the tumble dryer Electrical connections, Ventilation, Water drain
Page 3 Page 5

IDC 75, IDC 75 S specifications

The Indesit IDC 75 S is a highly efficient and versatile condensation dryer that reflects the brand's commitment to innovative home appliance technology. Designed with modern households in mind, this model offers a variety of features aimed at simplifying the laundry process while ensuring optimal fabric care.

One of the key features of the IDC 75 S is its 7 kg drying capacity, making it suitable for medium-sized families. This allows users to dry a substantial amount of laundry in one go, saving both time and energy. The dryer also boasts a robust drying program selection, including options for cottons, synthetics, and delicate fabrics. This versatility makes it easy for users to select the most appropriate cycle for different types of garments.

The IDC 75 S is equipped with advanced sensor drying technology. This feature detects moisture levels in the laundry and automatically adjusts the drying time accordingly, preventing over-drying and extending the life of your clothes. With the sensor function, users can choose between various dryness levels, from iron dry to extra dry, allowing for tailored results based on individual preferences.

Energy efficiency is another hallmark of the Indesit IDC 75 S. The model has an energy rating of B, reflecting its ability to minimize power consumption while delivering effective drying performance. This not only helps reduce energy bills but also provides an environmentally friendly option for conscious consumers.

User convenience is further enhanced by the dryer’s straightforward control panel, which features clearly labeled buttons and a simple dial for program selection. The model is also designed with a reverse tumble action, which helps reduce creasing and tangling of clothing, making ironing easier.

The IDC 75 S comes with a detachable water tank, enabling effortless emptying after use. In addition, its compact design allows it to fit seamlessly into smaller laundry spaces, making it an excellent choice for apartments or homes where space is a premium.

Overall, the Indesit IDC 75 S combines practicality, technology, and efficiency, delivering a robust drying solution for everyday laundry needs. Its thoughtful features and user-friendly design make it a reliable addition to any home, ensuring that clothes are dried quickly and with care.
Top Page Image Contents