Setting a delayed start
How to set a delayed start
When you have loaded the dishes, you can choose when to start your dishwasher before setting the wash cycle desired.
•Press button "P" repeatedly to postpone the start of the wash cycle from 1 hour to 24h.
•If you press the button again, the word "OFF" is displayed (no selection made).
Once you have made your selection, make sure the appliance door is shut and start the wash cycle by pressing the START button.
Symbol "I" lights up on the display and the countdown begins.
•Once the countdown is up, the wash cycle begins and the approximate amount of time left until the end of the wash cycle is displayed.
Have you changed your mind?
•If you change your mind, you can set a shorter time delay: press button "P" to select it. You need not reset the wash cycle.
•If you have changed your mind and wish to start the wash cycle immediately, press button "P" until the countdown is fully reset. Indicator light "I" will turn off and the cycle will start at the sound of a beep.
The indicator light corresponding to the cycle phase under way will come up on the display and the countdown to the estimated cycle end begins.
Warning: if the display indicates the word "dON" when you turn your dishwasher on, this means the demo mode is in operation. This mode is useful for exhibitors in that it simulates the wash cycles without actually carrying them out.
To quit this mode, keep the START/RESET button "R" pressed for approximately 4 seconds. The word "dOF" will be displayed once you have quit the demo mode successfully.
GB | 18 |
