Indesit KP9507EB Technical Specifications, Burners And Nozzles Specifications, Ie Gb, Liquid gas

ELECTRICAL CONNECTION

•the supply system is efficiently earthed according to standards and laws in force;

•the socket or double-pole switch are easily accessible when the appliance is installed.

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	- Earth
Blue	- Neutral
Brown	- Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked “E” or

or coloured Green or Green & Yellow.

Connect the Brown wire to the terminal marked “L” or coloured Red.

Connect the Blue wire to the terminal marked “N” or coloured Black.

The cable of this appliance are already fitted whit a moulded plug incorporating a fuse, the value of which is 13A (indicated on the pin face of the plug). Should the fuse need to be replaced, an ASTA approved BS1362 fuse must be used of the same ratingmarked ASA . This plug is not waterproof-keep dry. Fuse cover are available from the "parts department" indicated in your user instructions. If the plug supplied is not suitable for your actual outlet, it should be cut off and destroyed. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour asthat visible on the pin face of the plug (ie red or orange). The end of the flexible cable should be suitably prepared and the correct plug fitted.

TECHNICAL SPECIFICATIONS

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Energy consumption for Natural convection

heating mode: Convection

Declared energy consumption for Forced convection Class

heating mode: Fan assisted (mod. KP 958 MS.B)

This appliance conforms with the following European Economic Community directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;

-89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;

-90/396/EEC of 29/06/90 (Gas) and subsequent modifications;

-93/68/EEC of 22/07/93 and subsequent modifications.

Oven accessories which may come into contact with food are make in materials complying to what is laid down in EEC Directive 89/109 of 21.12.88 and national regulations in force.

BURNERS AND NOZZLES SPECIFICATIONS

Table 1 (GREAT BRITAIN and IRELAND)					Liquid gas				Natural gas
Burner	Diameter	Thermal power		By-pass	Injector	Flow *			Injector	Flow*
	(mm)	kW (H.s.*)		1/100	1/100		g/h		1/100	l/h
		Nomin.	Reduc.	(mm)	(mm)	G30		G31	(mm)	G20
Rapid C	100	3.00	0.7	40	86	218		214	116	286
Semi-rapid B	75	1.65	0.4	30	64	120		118	96	157
Auxiliary A	55	1.00	0.3	27	50	73		71	71	95
Triple ring D	130	3.25	1.3	57	91	236		232	124	309
Supply						30		37		20
pressure
* At 15°C and 1013 mbar-dry gas				Butane G30 H.s. = 49,47 MJ/kg
Propane G31		H.s. = 50,37 MJ/kg		Methane G20		H.s. = 37,78 MJ/m3

IE GB 8