Infinite Peripherals DPP-250 user manual Replacing Battery, Steps, Infinite Peripherals, Inc

Replacing Battery

To replace the battery in the DPP-250 thermal printer follow the steps below.

Steps:

1.Turn over the DPP-250 and place on a flat surface. Rotate the (2) locking levers as shown in the figure on the right.

Figure 15

2.Lift the battery cover as showed in the figure on the right.

Figure 16

3.Lift the battery as shown in the figure on the right.

Figure 17

4.Detach the battery connector as shown in the figure on the right. Reverse Steps 1-4 to install the new battery pack.

Figure 18

Infinite Peripherals, Inc.

www.ipcprint.com. . . . . . . . . . . .Page. . .26. . . . .

DPP-250 User Manual v1.01