TELEPHONE FEATURE SETUP
Set for Two or Three Phone Lines
If you’re not using all four phone lines, you need to turn off the line status for the unused line. If you expand to a third or fourth line, turn the line status back on. You cannot turn off line status for Line 1.
1Press G, *, #.
2Press 2for Line 2
— OR —
Press 3for Line 3
— OR —
Press 4for Line 4.
3Press 0to turn off line status
— OR —
Press 1to turn on line status.
4Press T. You’ll hear a confirmation ring.
Set Up for a Private Line
This feature works only if you have three phone lines connected. Line 4 may vary from phone to phone, so you can consider this a private line that other 954 phones cannot access.
NOTE: The phone number for Line 1 must be the same on all phones for the intercom and paging features to work.
1Press G, *, #.
2Enter a different line number
3Press and release H. You’ll hear a confirmation ring.
Change BATTERY Display
When battery power is low, the screen flashes BATTERY. Replace the batteries promptly to prevent memory loss (see the INSTALLATION section in this manual). You can set the phone so the screen won’t display the BATTERY message.
1Press G, *, #, *.
2Press and release 0to prevent BATTERY display
— OR —
Press and release 1to enable BATTERY display.
3Press and release C. You’ll hear a confirmation ring.
11
Lucent 0954 book.L1 | 11 | 5/7/98, 10:35 AM |
