OPERATION
Redial
The last number dialed on this phone is stored in redial memory until you dial another number. To dial the same number again, lift the handset or press K, listen for the dial tone, then press R.
Auto Redial
Select a line and press A. The screen displays BUSYDIAL as long as the number you’re calling is busy. The phone redials the number you just called, and will continue up to 10 times or until the other line rings or you cancel Auto Redial.
When you hear the line ringing, lift the handset or press Kto complete the call; if you don’t, the phone disconnects the call after 15 seconds. To cancel Auto Redial, press A, or lift the handset, or press K.
Hold
Press and release H. The light of the line on hold flashes, and a double beep sounds every 30 seconds to remind you the call is on hold. You can replace the handset in the cradle without disconnecting the call. The speakerphone is automatically turned off.
To release Hold, press and release the LINE button of the call on hold.
NOTE: You cannot put an intercom call on hold.
Disabling Hold Reminder
This phone comes programmed to remind you every 30 seconds when you have a call on hold. You can turn this feature off following the directions below.
1Press G, *, #, *.
2Press and release 4to turn off the alert beep
— OR —
Press and release 5to turn on the alert beep.
3Press and release M. You will hear a confirmation ring.
Switch Between Lines
1Press and release Hto keep a call on the first line.
2Press and release the LINE button of another line to make or answer another call.
NOTE: If you switch lines without pressing Hfirst, you will drop the call.
15
Lucent 0954 book.L1 | 15 | 5/7/98, 10:35 AM |
