23
Paging All Phones1Press and release a or p.
2Press and release *.
3Speak toward the telephone.
4Press and release K to disconnect.
Answering an ALLPAGE1Press a or p.
2Use the already activated speakerphone, or lift the handset.
3To end, press and release K or hang up.
Making an Intercom Conference Call1Make or answer a call.
2Press and release I and enter the station number.
3After the third party answers, press and release C.
4To end an intercom conference call, hang up.
NOTE: You cannot put an intercom conference call on hold.
Room MonitorYou can activate the speaker of another phone to monitor sounds in that
room.
1Press and release p.
2Enter the station number of the telephone to be monitored.
3Press and release M if you don’t want sounds on your end to be
heard.
4To end monitoring, press and release K.
Checking Your Station Number1Press and release I.
2Use the dial pad to enter a station number (11 to 22).
3Press K to hang up.
4Repeat Steps 1–3 until the intercom light goes off. The last number
entered is your station number.
NOTE: If the intercom light stays on even after you enter numbers 11
through 22, your phone does not have a station number. See “Assign
Intercom Number” in the TELEPHONE FEATURE SETUP section for
assigning intercom station numbers.
INTERCOM OPERATION
Lucent 0954 book.L1 5/7/98, 10:36 AM23