Infinity OVTR 2 Specifications - Ovtr, Drive Units Amplifier, Dimensions, Performance Data

PERFORMANCE DATA

DRIVE UNITS

AMPLIFIER

(BUILT-IN POWER AMPLIFIER FOR

LOW-FREQUENCY SECTION)

DIMENSIONS

(also see Figure 7 on page 11)

SPECIFICATIONS – OVTR 3

Frequency Range:	25 ~ 20,000 Hz
Sensitivity:	94 dB @ 2.83 V and 1 m (anechoic conditions)
Impedance:	8 Ω nominal
Maximum Peak Output:	115 dB (spl on program)
Amplifier Requirements:	Recommended for use with amplifiers
	15 ~ 200 W (@ 8 Ω)
Low Frequency:	Four 6 1 ⁄2" (165 mm) high-efficiency,
	dynamically-balanced, magnetically-
	shielded woofers
Mid Frequency:	Two 5 1 ⁄4" (125 mm) high-efficiency,
	magnetically-shielded, mid-range drivers
High Frequency:	One 1" (25 mm) soft dome, high-efficiency,
	neodymium magnet, magnetically-
	shielded tweeter
Crossover Frequencies:	350 and 3,000 Hz
Peak Output:	500 VA
Power Supply:	120 V~60 Hz
Power Consumption:	500 W (maximum), 7 W (standby)
Width:	6 7⁄8" (175 mm); add 31⁄8" (79 mm) for foot bar
Height:	46" (1,168 mm)
Depth:	15 3⁄4" (400 mm)
Weight:	59 lb or 26.6 kg (each)

10 ◆ Compositions Overture OVTR 2/OVTR 3 – Owner’s Manual