Connections & Setup
CABLE
ETHERNET |
|
|
|
DIGITAL |
|
|
|
AUDIO |
|
|
|
OUTPUT |
|
|
|
| SUBWOOFER | CTR | |
|
|
| R |
| FIXED/ |
| REAR |
|
|
| |
|
|
| L |
|
|
| REAR |
|
|
| MATRIX |
|
|
| SURROUND |
|
|
| OUTPUTS |
CableCARD™ | DigitalCable |
| |
|
| ||
| Card |
|
|
|
|
| INPUT 3 |
HDMI/DVI |
|
| R |
|
|
| |
INPUT |
|
|
|
Use menu for |
|
|
|
DVI audio. |
| L | L |
|
| ||
| COMPOSITE |
|
|
| INPUTS |
|
|
|
| V | V |
CABLE |
|
|
|
INPUT |
|
|
|
|
| ||
|
| R | R |
For Factory Use Only |
|
| |
|
| L | L |
| COMPONENT/ |
|
|
| COMPOSITE |
|
|
| INPUTS |
|
|
| Use menu for | PR | PR |
| composite | ||
| video. |
|
|
|
| PB | PB |
POWER |
|
|
|
(AC 120V~60Hz) |
|
|
|
ANTENNA |
| Y/VIDEO | Y/VIDEO |
INPUT |
|
|
|
|
| INPUT 2 | INPUT 4 |
TV |
|
|
|
FCC Statement: This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A security card provided by your cable operator is required to view encrypted digital programming. Certain advanced and interactive digital cable services such as
How to Connect: TV + CableCARD
The CableCARD slot allows you to use a digital cable television card to receive digital cable services, including premium and HDTV cable channels, without the need for a
When you receive the digital cable card, make sure you connect your coaxial cable to the CABLE INPUT jack. Then, turn on your TV. Insert the digital cable card into the slot on the back of the TV labeled CableCARD. Push firmly on the card until almost the entire card is inserted. Wait to receive information
You should know:
•Once the digital cable card is authorized for a particular TV, the card can’t be used with any other TV, unless it is re- authorized to it.
•You won’t receive digital cable channels if you connect your cable to the ANTENNA INPUT. Make sure you connect your cable to the CABLE INPUT.
•Once inserted, it is not recommended you remove the digital cable card. In the case it needs to be removed, grasp firmly, and pull the card straight out.
Setting Up Digital Cable Television Service
Once you have connected a digital cable card to the CableCARD slot on the back of the TV (explained above), you are ready to receive digital cable channels. Wait approximately 30 seconds for the status screen to appear. Write down the information you see and call your cable company to provide them with the information
Notes: If your information screen disappears before you have a chance to write down the information, press MENU on the remote to access the menu system. Then press 9, 9, 9, and the information screen appears. Go to page 66 for more information on the CableCARD Tools menu.
You can’t order
20 | Chapter 1 |
