Using the audio

To play sound from the projector, connect your source to the Audio In con- nector on the projector.

To adjust the volume, use the buttons on the keypad or remote.

To mute the sound, press the Mute button.

Troubleshooting audio

If there is no sound, check the following:

Make sure the audio cable is connected.

Make sure mute isn’t active.

Make sure the volume is turned up enough. Press the volume button on the keypad or remote.

Make sure that if you are connected to Computer 1 on the back of the projector, that you are also connected to the corresponding audio in. If you are connected to Computer 2, be sure you are connected to its cor- responding audio in.

Adjust the audio source.

If playing a video, make sure the playback has not been paused.

Connecting external speakers

The projector can be attached to external speakers that have their own power source by plugging speaker cables into the projector’s left and right Audio Out connectors.

connect audio cable

adjust volume

computer 1 and corresponding audio

audio in

computer 1

audio in

computer in

computer in

external speakers

speaker cable

monitor network

computer in

serial control

computer 2 and

computer 2 corresponding audio

monitor network

serial control

audio out

26

Page 27
Image 27
InFocus LP650 manual Using the audio, Troubleshooting audio, Connecting external speakers