Displaying a computer image

Remove the lens cap.

remove lens cap

 

Press the Power button on the top of the projector or the remote.

press Power

The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness.

? No startup screen? Get help on page 17.

Turn on your computer.

turn on computer

 

The computer’s image should appear on the projection screen. If it doesn’t, press the Computer button on the projector’s keypad.

Make sure your laptop’s external video port is active.

activate laptop’s external port

Many laptops do not automatically turn on their external video port when a projector is connected. Usually a key combination like FN + F5 is used to turn the external display on and off. Refer to your computer’s documenta- tion to learn your computer’s key combination.

?No computer image? Try pressing the Auto Image button on the keypad. Get help on page 17.

9

Page 10
Image 10
InFocus LP650 manual Displaying a computer image, ? No startup screen? Get help on