InFocus LP650 manual Connect RS-232 cable

If you prefer connecting your computer to the projector with an optional

VESA cable, connect one end of the cable to the VESA port on your com-connect VESA cable puter, and connect the other end of the cable to the blue Computer 2 con-

nector on the projector.

You can control the projector from an LCD control panel or computer by connecting an RS-232 cable to the projector’s Serial connector. Specific

connect RS-232 cable

RS-232 commands can be found in the Service and Support section of our website at www.infocus.com/sevice.

The projector can be managed by ProjectorNet networking software through its Network connector.

connect network cable

Contact an authorized InFocus dealer or visit the ProjectorNet website at www.infocus.com/projectornet for information on ProjectorNet.

Network

8